Lenovo ThinkStation 0567 Скачать руководство пользователя страница 60

Страница: 60 / 134

Refer to the “Lithium battery notice” in the

ThinkStation Safety and Warranty Guide

for information about

replacing and disposing of the battery.

To replace the battery, do the following:

1. Turn off the computer and disconnect all power cords from electrical outlets.

2. Remove the computer cover. See “Removing the computer cover” on page 30.

3. Locate the battery. See “Locating parts on the system board” on page 11.

4. Remove the old battery.

Figure 35. Removing the old battery

5. Install a new battery.

Figure 36. Installing a new battery

6. Reinstall the computer cover and connect the cables. See “Completing the parts replacement” on

page 55.

Note:

When the computer is turned on for the first time after replacing the battery, an error message

might be displayed. This is normal after replacing the battery.

7. Turn on the computer and all attached devices.

8. Use the Setup Utility program to set the date, time, and any passwords. See Chapter 7 “Using the Setup

Utility program” on page 65.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 55.

Replacing the power supply assembly

Attention:

Do not open your computer or attempt any repair before reading and understanding the “Important

safety information” on page v.

This section provides instructions on how to replace the power supply assembly.

ThinkStation User Guide

Содержание ThinkStation 0567







































































































































Результаты поиска

Содержание ThinkStation 0567

Отзывы:

Lenovo ThinkStation 0567, Руководство пользователя, Страница: 60 / 134

Результаты поиска

Содержание ThinkStation 0567

Отзывы: