Lenovo ThinkStation 0567 Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 134

Lenovo ThinkStation 0567 Скачать руководство пользователя страница 59

8. Slide the new card reader into the drive bay until it snaps into position.

Figure 34. Installing the card reader

9. Reconnect the card reader cable to the front USB connector on the system board. See “Locating

parts on the system board” on page 11.

10. Reinstall the front bezel. See “Removing and reinstalling the front bezel” on page 30.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 55.

Replacing the battery

Attention:

Do not open your computer or attempt any repair before reading and understanding the “Important

safety information” on page v.

Your computer has a special type of memory that maintains the date, time, and settings for built-in features,
such as parallel-port assignments (configuration). A battery keeps this information active when you turn
off the computer.

The battery normally requires no charging or maintenance throughout its life; however, no battery lasts
forever. If the battery fails, the date, time, and configuration information (including passwords) are lost. An
error message is displayed when you turn on the computer.

Chapter 5

.

Installing or replacing hardware

47

«
...
57
58
59
60
61
...
»

Содержание ThinkStation 0567







































































































































Отзывы:

Нет отзывов