Lenovo ThinkStation 0567 Скачать руководство пользователя страница 125 | Manualshive

Страница: 125 / 134

Lenovo ThinkStation 0567 Скачать руководство пользователя страница 125

Appendix D. WEEE and recycling information

Important information for the European Directive 2002/96/EC

EU Only

The Waste Electrical and Electronic Equipment (WEEE) mark applies only to countries within the European
Union (EU) and Norway. Appliances are labeled in accordance with European Directive 2002/96/EC
concerning waste electrical and electronic equipment (WEEE). The Directive determines the framework for
the return and recycling of used appliances as applicable throughout the European Union. This label is
applied to various products to indicate that the product is not to be thrown away, but rather reclaimed upon
end of life per this Directive. Users of electrical and electronic equipment (EEE) with the WEEE marking per
Annex IV of the WEEE Directive must not dispose of end of life EEE as unsorted municipal waste, but use the
collection framework available to them for the return, recycle, recovery of WEEE and minimize any potential
effects of EEE on the environment and human health due to the presence of hazardous substances. For
additional WEEE information go to: http://www.lenovo.com/lenovo/environment.

Recycling information

Lenovo encourages owners of information technology (IT) equipment to responsibly recycle their equipment
when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in
recycling their IT products. For information on recycling Lenovo products, go to:
http://www.lenovo.com/recycling

Collecting and recycling a disused Lenovo computer or monitor

© Copyright Lenovo 2012

113

«
...
123
124
125
126
127
...
»

Содержание ThinkStation 0567







































































































































Отзывы:

Нет отзывов