Lenovo ThinkServer TS150, Руководство по установке операционной системы

Страница: 17 / 60

• Manually create a root partition (/)
To create a root partition, do the following:
a. Click Partitioning and select Custom Partition (for experts) . Click Next .
b. In the Expert Partitioner window, select Hard Disks , and then click Add .
c. In the New Partitions Size window, select Custom Size .
d. Type the amount of space (in MB) in the Custom Size field and then click Next .
e. In the Formatting Options area, select Ext3 from the File system drop-down list box.
f. In the Mounting partition area, select the forward slash (/) from the Mount Point drop-down
list box.
g. Click Finish .
• Manually create a boot partition (/boot)
To create a boot partition, do the following:
a. In the Expert Partitioner window, select Hard Disks , and then click Add .
b. In the New Partitions Size window, select Custom Size .
c. Type the amount of space (in MB) in the Custom Size field and then click Next .
d. In the Formatting Options area, select FAT from the File System drop-down list box.
e. In the Mounting partition area, select /boot/efi from the Mount Point drop-down list box.
f. Click Finish .
• Manually create a swap partition
To create a swap partition, do the following:
a. In the Expert Partitioner window, select Hard Disks , and then click Add .
b. In the New Partitions Size window, select Custom Size .
c. Type the amount of space (in MB) in the Custom Size field.
d. In the Formatting Options area, select Swap from the File system drop-down list box.
e. In the Mount partition area, select Swap from the Mount Point drop-down list box.
f. Click Finish .
Go to the Expert Partitioner window. The created root partition, boot partition, or swap partition is
displayed in the window. Ensure that the created partition is correct and click
Accept . The drive
partition is finished.
9. In the Installation Settings window, click Software to select your desired software programs, and then
click OK . If the YaST window is displayed, click Accept .
10. Click Install to install the software programs that you have selected.
Notes:
• If a Warning window is displayed, select the option you need. The following steps are based on the
scenario that Ignore this conflict of ... is selected. Do the following:
a. Click OK-TryAgain .
b. In the YaST window, click Accept .
c. In the Installation Settings window, click Install to begin the installation.
• If the YaST2 window is displayed, click Install to begin the installation.
11. When the Confirm Installation window is displayed, click Install . When the installation process is
completed, the server will restart automatically.
Chapter 2
.
Installing an operating system in UEFI mode
13