Lenovo ThinkServer RS140, Руководство по установке операционной системы

Страница: 19 / 44

21. In the “Keep your server up-to-date automatically” window, configure the settings as you need. Your
server will restart several times.
22. When the “Your server is now ready to be used” window is displayed, click Close . The installation is
completed.
Installing drivers for Windows Server 2012 Essentials
To install drivers for Windows Server 2012 Essentials, refer to the related topics.
• “Installing the driver for the chipset” on page 9
Note: If you want to install the driver for chipset manually, right-click the driver and select Administrator .
• “Installing the driver for an onboard graphics card” on page 10
• “Installing the driver for an Ethernet card” on page 13
• “Installing the driver for an HBA card” on page 6
Note: The driver for onboard USB 3.0 connectors is installed during the operating system installation.
Installing a Microsoft Windows Server 2012 R2 operating system
This topic provides instructions on how to install the following operating systems:
• Microsoft Windows Server 2012 R2 Datacenter Edition
• Microsoft Windows Server 2012 R2 Foundation Edition
• Microsoft Windows Server 2012 R2 Standard Edition
This topic also provides instructions on how to install device drivers for the operating system.
Installing a Microsoft Windows Server 2012 R2 operating system
To install a Microsoft Windows Server 2012 R2 operating system, do the following:
1. Insert the operating system installation disc into the optical drive that you have set as the first startup
device. Then, start the server from the optical drive.
2. If the message
Press any key to boot from cd
is displayed, press any key. If the message
Windows Setup
[EMS Enabled]
is displayed, press Enter. Wait several minutes for the system to load the files.
3. When the Windows Server 2012 R2 window is displayed, configure the language and other options as
you need, and then click Next .
4. Click Install now .
5. If prompted, type your product key and then click Next . The product key information is available on the
Microsoft Certificate of Authenticity label or product packaging.
6. Select the Windows operating system edition that you want to install. Then, click Next .
Note: If you are installing the Windows Server 2012 R2 Foundation operating system, skip this step.
7. Read the license terms and select I accept the license terms . Click Next .
8. Select the type of installation as you need. The following steps are based on the scenario that Custom:
Install Windows only (Advanced) is selected in this step.
Note: If you do not need to configure RAID on your server, go to step 10.
9. If you want to install the driver for the onboard SATA software RAID or installed RAID card, do the
following:
a. In the “Where do you want to install Windows?” window, click Load driver .
Chapter 2
.
Installing an operating system in legacy mode
15