Lenovo ThinkServer RS140, Руководство по установке операционной системы

Страница: 13 / 44

11. Select Hide drivers that aren’t compatible with this computer’s hardware , and then select the driver
that you want to install on your server. Click Next .
12. In the “Where do you want to install Windows?” window, click Drive options (advanced) .
13. Select the hard disk drive on which you want to install the operating system, and then click New .
14. Type the amount of space (in MB), and then click Apply . The Install Windows window is displayed.
15. Click OK .
16. Select the drive partition on which you want to install the operating system, and then click Next . The
installation begins.
Note: Your server will restart several times during the installation.
17. Change your password when prompted.
Note: The password must consist of uppercase letters, lowercase letters, and digits.
18. Follow the instructions on the screen to log in to the operating system.
Installing the driver for the chipset
To install the driver for the chipset, do the following:
1. Log in to the operating system and insert the ThinkServer EasyStartup DVD into the optical drive. The
ThinkServer EasyStartup DVD runs automatically.
Note: If the DVD does not run automatically, click Run launch.exe in the AutoPlay window.
2. Read the license terms, click Accept .
Note: If prompted, click Add ➙ Close .
3. In the welcome window, click Diver Installation (or Driver Install in some operating systems).
4. Select your server model from the Server Model drop-down list box, the operating system from the
Operating System drop-down list box, and Intel (R) C226 Series Chipset from the Select a Driver (or
Please Select Driver in some operating systems) drop-down list box.
5. Click Install .
Note: If prompted, click Yes .
6. In the “Welcome to the Setup Program” window, click Next . The License Agreement window is
displayed.
7. Click Yes . The Readme File Information window is displayed.
8. Click Next .
Notes:
• If the message “Would you like to install this device software?” is displayed, select Always trust
software from “Intel Corp –Chipset INF” . Then, click Install .
• If the Windows Security window is displayed, click Install .
9. Click Next . The Setup is Complete window is displayed.
10. Select Yes, I want to restart this computer now . Then, click Finish to restart your server.
Installing the driver for an Ethernet card
If the onboard SATA software RAID is available on your server and you want to install the driver for an
Ethernet card, do the following,
Chapter 2
.
Installing an operating system in legacy mode
9