Lenovo ThinkServer RS140, Руководство по установке операционной системы

Страница: 14 / 44

1. Download the driver for Ethernet card from the Lenovo Support Web site. If the driver is a compressed
file, unzip it to a folder. The most up-to-date device drivers for various server models are always
available for download on the Lenovo Support Web site at:
http://www.lenovo.com/drivers
2. Copy the folder that contains the driver to a USB storage device and connect the USB storage device to
your server.
3. Log in to the operating system.
4. In the Device Manager window, right-click the Ethernet card which you want to install drivers for.
5. Click Update Driver Software ➙ Browse my computer for driver software .
6. Go to the folder where the driver is stored, click OK , and then click Next . The installation begins.
Note: If prompted, select Always trust software from Qlogic Corporation and click Install .
7. When the installation is completed, click Close .
If your server is installed with an LSI9240-8 or LSI9260-8I RAID card and you want to install the driver
for an Ethernet card, do the following:
1. Log in to the operating system and insert the ThinkServer EasyStartup DVD into the optical drive. The
ThinkServer EasyStartup DVD runs automatically.
Note: If the DVD does not run automatically, click Run launch.exe in the AutoPlay window.
2. Read the license terms, and click Accept . The welcome or ThinkServer EasyStartup window is
displayed.
3. Click Drivers Install .
4. Select your server model from the Server Model drop-down list box, the operating system from the
Operating System drop-down list box, and the driver from the Select a Driver drop-down list box.
5. Click Install to install the driver.
Note: If prompted, click Yes .
Installing the driver for an onboard graphics card
To install the driver for an onboard graphics card, do the following:
1. Log in to the operating system and insert the ThinkServer EasyStartup DVD into the optical drive. The
ThinkServer EasyStartup DVD runs automatically.
Note: If the DVD does not run automatically, click Run launch.exe in the AutoPlay window.
2. Read the license terms, and click Accept . The welcome window is displayed.
3. Click Driver Installation (or Drivers Install in some operating systems).
4. Select your server model from the Server Model drop-down list box, the operating system from the
Operating System drop-down list box, and the driver from the Select a driver (or Please Select
Driver in some operating systems) drop-down list.
5. Click Install .
Note: If prompted, click Yes .
6. In the “Welcome to the Setup Program” window, click Next . The License Agreement window is
displayed.
7. Click Yes . The Readme File Information window is displayed.
8. Click Next .
10
ThinkServer RS140 Operating System Installation Guide