Lenovo ThinkPad X1 Carbon, Руководство пользователя

Страница: 61 / 167

Setting up a presentation
To display information and make presentations, you can connect a data projector to your computer through
the Mini DisplayPort connector on your computer by using a Lenovo Mini-DisplayPort to VGA Adapter Cable.
The Lenovo Mini-DisplayPort to VGA Adapter Cable is available as option at
http://www.lenovo.com/essentials
Note: It may take several seconds before the projector displays the image. If you do not see your desktop
displayed after 60 seconds, tap the display-mode icon in the Function mode to switch between different
display output locations.
Your projector might have one or more audio-input connectors. To project sound, you need to attach
the combo audio connector on your computer to these connectors, using an audio cable (commercially
available).
Using dual displays
This section introduces the Duplicate and Extend desktop functions that enable you to display output on
both the computer display and an external monitor.
Using the Duplicate or Extend desktop function
With the Duplicate desktop function, you can display the same output on both the computer display and
an external display. You also can display different desktop images on each monitor with the Extend
desktop function.
You can use the Duplicate or Extend desktop function without changing any settings. If the function does
not work, refer to the following topic on how to enable the Duplicate or Extend desktop function.
Enabling the Duplicate or Extend desktop function
To enable the Duplicate or Extend desktop function, do the following:
1. Connect the external monitor to your computer; and then connect the monitor to an electrical outlet.
2. Turn on the external monitor.
3. Tap the display-mode icon in the Function mode, and then select Duplicate or Extend .
To change the resolution for each monitor, do the following:
1. Right-click anywhere on the desktop, and click Screen resolution .
2. Click the Monitor-1 icon, which is for the primary display (the computer display by default).
3. Set the resolution for the primary display.
4. Click the Monitor-2 icon, which is for the secondary display (the external display by default).
5. Set the resolution for the secondary display.
6. Click Advanced settings and set up the color quality on the Monitor tab.
7. Click OK to apply the changes.
Considerations for using the Extend desktop function
• In Extend desktop mode, only the primary display shows DOS full-screen, and the other display is
blacked out.
• If your computer has the Intel graphics card, you can designate the primary display by doing the following:
1. Right-click anywhere on the desktop and select Screen Resolution .
2. Click the desired display image and select the Make this my main display check box.
Chapter 2
.
Using your computer
45