Lenovo ThinkAgile VX2320, Руководство пользователя

Страница: 77 / 108

• All network ports are fully functional.
PCIe adapter replacement
Use this information to remove and install a PCIe adapter.
ThinkSystem VX7Y13 Series appliances can support up to eight network ports; two or four 10 GbE ports (up
to two NICs), and two or four 10 GbE ports on the LOM adapter, connected to the motherboard. A node
requires network connectivity to function as part of a cluster. If one network interface is available, the failure
of the other network interfaces does not cause service interruption.
A failed NIC is indicated by:
• No LED is illuminated for the network interface.
• Guest VM performance degrades.
• Guest VMs, the vSphere Web console, and esxcli are unavailable.
• VM migration fails with an error message, such as:
The migration was cancelled because the amount of changing memory for the VM
was greater than the available network bandwidth
Remove a PCIe adapter
Use this information to remove a PCIe adapter.
“ Read the
installation
Guidelines” on
page 47
“ Power off
the server
for this task”
on page 33
“ ATTENTION:
Static Sensitive Device
Ground package before opening”
on page 49
Before removing a PCIe adapter from the riser assembly:
1. ThinkSystem VX7Y13 Series appliances can contain zero or one LOM NIC, with two or four ports, as well
as up to two PCIe NICs. For nodes with multiple NICs, verify which has failed. Identify the failed NIC by
either checking in the XCC or checking the indicator lights on the network ports.
2. Place the node in maintenance mode by following the procedure
Enter Maintenance Mode
in
https://
storagehub.vmware.com/ .
3. Power off the node and if the cable management arm is not in place, disconnect all the cables.
4. Remove the appliance from the rack.
5. Remove the top cover.
6. Remove the riser assembly.
To remove a PCIe adapter, complete the following steps:
Chapter 8
.
Hardware Replacement Procedures
73