Lenovo ThinkAgile MX3321-F, Руководство пользователя

Страница: 68 / 126

Chapter 4 “ Read
the
installation
Guidelines” on
page 29
“ Power off
the server
for this task”
on page 34
“ ATTENTION:
Static Sensitive Device
Ground package before opening”
on page 31
Before removing a riser card, remove the top cover. See “Remove the top cover” on page 108.
To remove a riser card, complete the following steps:
Note: The riser assembly you want to remove might be different from the following illustrations, but the
removal method is the same.
Step 1. Grasp the riser assembly by its edges and carefully lift it out of the chassis.
Figure 40. Riser assembly removal
Step 2. If there is any PCIe adapter installed on the riser card, record the cable connections first. Then,
disconnect all cables from the PCIe adapter and completely remove the riser assembly out of the
chassis.
Step 3. Remove the PCIe adapters that are installed on the riser card. See “Remove a PCIe adapter” on
page 61.
Step 4. Remove the two screws that secure the riser card to the bracket. Then, remove the riser card.
64
ThinkAgile MX Certified Node 1UThinkAgile MX3321-H, MX3321-FUser Guide