Lenovo ThinkAgile MX3321-F, Руководство пользователя

Страница: 53 / 126

2. If you are instructed to return the old hot-swap drive, follow all packaging instructions and use any
packaging materials that are provided.
Install a hot-swap drive
Use this information to install a hot-swap drive.
Chapter 4 “ Read
the
installation
Guidelines” on
page 29
“ ATTENTION:
Static Sensitive Device
Ground package before opening”
on page 31
The following notes describe the type of drives that your server supports and other information that you must
consider when you install a drive.
• Depending on your server models, your server supports the following types of drives:
– SAS/SATA HDD
– SAS/SATA SSD
– NVMe SSD
For a list of supported drives, see:
http://www.lenovo.com/us/en/serverproven/
• The drive bays are numbered to indicate the installation order (starting from number “0”). Follow the
installation order when you install a drive. See “Front view” on page 13.
• You can mix drives of different types and different capacities in one system, but not in one RAID array.
The following order is recommended when installing the drives:
– Drive type priority: NVMe SSD, SAS SSD, SATA SSD, SAS HDD, SATA HDD
– Drive capacity priority: the lowest capacity first
• For server models with ten 2.5-inch drive bays in the front, NVMe drives are supported in drive bays 6–9.
• The drives in a single RAID array must be the same type, same size, and same capacity.
Before installing a hot-swap drive:
1. Remove the drive filler from the drive bay. Keep the drive filler in a safe place.
Figure 22. Drive filler removal
Chapter 5
.
Hardware replacement procedures
49