Lenovo T560, Руководство пользователя, Страница: 49 / 186

DANGER
Do not put the battery pack in trash that is disposed of in landfills. When disposing of the battery,
comply with local ordinances or regulations and your company's safety standards.
DANGER
There is a danger of an explosion if the coin-cell battery is incorrectly placed. The lithium battery
contains lithium and can explode if it is not properly handled, or disposed of. Replace only with a
battery of the same type. To avoid possible injury or death, do not: (1) throw or immerse into water,
(2) allow it to heat to more than 100°C (212°F), or (3) attempt to repair or disassemble it. Dispose of
it as required by local ordinances or regulations and your company's safety standards.
Managing the power plan
To achieve the best balance between performance and power saving, adjust your power plan settings.
To adjust power plan settings, do the following:
1. Go to Control Panel and then change the view of Control Panel from Category to Large icons or Small
icons.
2. Click Power Options .
3. Follow the instructions on the screen.
Power-saving modes
There are several modes that you can use to conserve power according to your situation and computing
needs. This section introduces each mode and gives tips on the effective use of battery power.
• Screen blank mode (for Windows 7 only)
The computer display requires considerable battery power. To enter screen blank mode, right-click the
battery gauge icon in the windows notification area and select
Power off display .
• Sleep mode
In sleep mode, your work is saved to memory, and then the storage drive and the computer display are
turned off. When your computer wakes up, your work is restored within seconds.
To put your computer into sleep mode, do the following:
– For Windows 7 : Open the Start menu, then click the arrow next to the Shut down button. Click
Sleep from the menu displayed.
– For Windows 10: Open the Start menu, click Power , and then click Sleep .
• Hibernation mode
By using this mode, you can turn off your computer completely without saving files or exiting any
programs that are running. When the computer enters hibernation mode, all open programs, folders, and
files are saved to the storage drive, and then the computer turns off.
To put the computer into hibernation mode, do the following:
– For Windows 7 : Open the Start menu, then click the arrow next to the Shut down button. Click
Hibernate from the menu displayed.
– For Windows 10 : Define what the power button does first and then press the power button to put the
computer into hibernation mode. For more information, see “Front view” on page 1.
If you put your computer into hibernation mode with the wake-up function disabled, the computer does
not consume any power. The wake-up function is disabled by default. If you put your computer into
hibernation mode with the wake-up function enabled, the computer consumes a small amount of power.
Chapter 2
.
Using your computer
33