© Copyright Lenovo 2017
ONIE on the G8296
17
To check which in ONIE mode the switch is configured to boot, use the following
command from the switch CLI:
Lenovo Cloud Network OS:
Booting in ONIE Uninstall Mode
This mode is used to uninstall a NOS using ONIE. The ONIE uninstall mode boots
the ONIE kernel and deletes the NOS image running on the switch. After the
uninstall is complete, the ONIE discovery process is executed.
To boot the switch in ONIE uninstall mode on the next reload, use the following
command from the switch CLI:
Lenovo Cloud Network OS:
Note:
The following warning will be displayed after choosing ONIE uninstall
mode and you will be prompted for confirmation:
Once you confirm, the switch will boot in ONIE uninstall mode on the next reload.
For more details, see
“Uninstalling the Lenovo Network OS” on page 20
.
G8296(config)#
display boot
Current FLASH software:
active image: version 10.2.1.0
standby image: version 10.2.1.0
Uboot: version 10.2.1.0
ONIE: version 10.2.1.0
Currently set to boot ONIE install mode
Currently scheduled reboot time: none
Current port mode: default mode
G8296(config)#
startup image onie-image uninstall
WARNING: Booting ONIE in uninstall mode will completely uninstall the
operating system!
Only the ONIE image will be preserved.
Are you sure you want the next boot to uninstall the OS? (y/n)
