© Copyright Lenovo 2017
ONIE on the G8296
15
Following is an example using the
cp tftp
command:
6.
To check if the ONIE image was successfully installed on the switch, use the
following command:
In the command output, the current ONIE image installed on the switch is
displayed under the
Current FLASH software
section.
G8296#
cp tftp tftp://10.72.97.98/onie-img/G8296-CNOS-10.2.1.0_ONIE.imgs
system-image onie vrf management
Confirm download operation? (y/n) [n] y
Download in progress
...
Copy Success
Install image...This takes about 90 seconds. Please wait
Valid image detected.
Check image signature succeeded
Extracting image: 100%
Installing ONIE:
Updating flash: 100%
Updating ONIE eeprom with manufacturing fields...
ONIE image installation succeeded.
ONIE image now contains Software Version 10.2.1.0
G8296#
display boot
Current FLASH software:
active image: version 10.2.1.0
standby image: empty
Uboot: version 10.2.1.0
ONIE: version 10.2.1.0
Currently set to boot software active image
Currently scheduled reboot time: none
Current port mode: default mode
