Appendix A
A - 3
A
If the rarp daemon is not already running, start it (depending on the system the command can be
rarpd,
rarpd -a, in.rarpd -a
or something else; type
man rarpd
or refer to your system documentation for
additional information). To verify that the rarp daemon is running on a Berkeley UNIX
®
-based system, type
the following command:
ps -ax | grep -v grep | grep rarpd
For AT&T UNIX
®
-based systems, type:
ps -ef | grep -v grep | grep rarpd
The Lenovo print server will get the IP address from the rarp daemon when the printer is powered on.
Using APIPA to configure the IP address
The Lenovo print server supports the Automatic Private IP Addressing (APIPA) protocol. With APIPA, DHCP
clients automatically configure an IP address and subnet mask when a DHCP server is not available. The
device chooses it's own IP address in the range 169.254.1.0 through to 169.254.254.255. The subnet mask
is automatically set to 255.255.0.0 and the gateway address is set to 0.0.0.0.
By default, the APIPA protocol is enabled. If you want to disable the APIPA protocol, you can disable it using
printer control panel. For more information, see
If the APIPA protocol is disabled, the default IP address of a Lenovo print server is 192.0.0.192. However,
you can easily change this IP address number to match with the IP address details of your network.
Using ARP to configure the IP address
If you are unable to use the BRAdmin application and your network does not use a DHCP server, you can
also use the ARP command. The ARP command is available on Windows
®
systems that have TCP/IP
installed as well as UNIX
®
systems. To use arp enter the following command at the command prompt:
arp -s ipaddress ethernetaddress
Where
ethernetaddress
is the Ethernet address (MAC address) of the print server and
ipaddress
is the
IP address of the print server. For example:
Windows® systems
Windows
®
systems require the hash "-" character between each digit of the Ethernet address.
arp -s 192.168.1.2 00-80-77-31-01-07
