Lenovo HR630X V2, Руководство пользователя

Страница: 47 / 134

Attention:
• Read “Installation Guidelines” on page 27 to ensure that you work safely.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Procedure
Step 1. Touch the static-protective package that contains the drive to any unpainted surface on the outside
of the server. Then, take the drive out of the package and place it on a static-protective surface.
Step 2. Remove the drive filler from the drive bay and keep the drive filler in a safe place.
Figure 13. Drive filler removal
Step 3. Install the drive in the drive bay.
Figure 14. Hot-swap drive installation
a. Ensure that the drive tray handle is in the open position. Slide the drive into the drive bay until it
snaps into position.
b. Close the drive tray handle to lock the drive in place.
Step 4. Check the drive LEDs to verify that the drive is operating correctly. For details, see “Drive LEDs” on
page 10.
Chapter 4
.
Hardware replacement procedures
39