Lenovo 70LU Скачать руководство пользователя страница 11

Страница: 11 / 142

• Torque the wiring-terminal screws to 1.4 newton-meters or 12 inch-pounds.

• Provide a readily available, approved and rated disconnect device in the field wiring.

Statement 17

CAUTION:
This product contains a Class 1M laser. Do not view directly with optical instruments.

Statement 18

CAUTION:
Do not place any object on top of rack-mounted products.

Statement 19

CAUTION:
Hazardous moving parts. Keep fingers and other body parts away.

Statement 20

CAUTION:
A lithium ion battery is provided. To avoid possible explosion, do not burn the battery. Replace the
battery only with the Lenovo-approved part. Recycle or discard the battery as instructed by local
regulations.

Products that are not assessed

Typical products that are

not assessed

include but not limited to the following:

• Server and IT-rack components (for example, uninterruptible power supplies and current distribution

systems)

• Devices in IT rooms (for example, bulk storage units and network products)

Содержание 70LU















































































































































Результаты поиска

Содержание 70LU

Отзывы:

Бренды по названию

Популярные бренды

Lenovo 70LU, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Результаты поиска

Содержание 70LU

Отзывы:

Бренды по названию

Популярные бренды