Lenovo 6290, Руководство по техническому обслуживанию аппаратной части

Страница: 98 / 136

3. Select APM BIOS Mode within the APM sub menu and be sure it is set to
Enabled . If it is not press Left Arrow (
}
) or Right Arrow (Æ) to change the
setting.
4.
Select Automatic Hardware Power Management .
5. Set Automatic Hardware Power Management to Enabled .
6. Select values for the three categories of power management (system power
processor speed and display) as necessary.
7. Set Hard Disk to Enabled or Disabled .
Note: This does not apply to SCSI drives.
8. Press Esc twice to return to the Configuration/Setup Utility program menu.
9.
Before you exit from the program select
Save Settings
from the
Configuration/Setup Utility program menu.
10. To exit from the Configuration/Setup Utility program press Esc and follow
the instructions on the screen.
Automatic Power-On features
The Automatic Power-On features within the Power Management menu allow you
to enable and disable features that turn on the computer automatically.
v
Serial Port A Ring Detect : With this feature set to Enabled and an external
modem connected to serial port (COM1) the computer will turn on
automatically when a ring is detected on the modem.
v PCI Modem Ring Detect
: With this feature set to
Enabled
the computer will
turn on automatically when a ring is detected on the internal modem.
v
PCI Wake Up: This feature allow PCI cards that support this capability to wake
the system.
v
Wake Up on Alarm : You can specify a date and time at which the computer will
be turned on automatically. This can be either a single event or a daily event.
v
Wake on LAN : If the computer has a properly configured token-ring or Ethernet
LAN adapter card that is Wake on LAN-enabled and there is remote network
management software you can use the IBM-developed Wake on LAN feature.
When you set Wake on LAN to
Enabled the computer will turn on when it
receives a specific signal from another computer on the local area network
(LAN). For further information see “Alert on LAN” on page 88.
92
Hardware Maintenance Manual