Lenovo 3376 Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 174

background image

USB problems

Symptom: The USB connectors cannot be accessed.

Actions:

• Make sure the USB cable is securely connected to the USB connector and to the USB device. If the USB

device has its own power cord, make sure it is attached to a properly grounded electrical outlet.

• If the USB device has its own On/Off switch, make sure it is in the On position.

• If the USB device has an Online switch, make sure it is in the Online position.

• If the USB device is a printer, make sure paper is loaded correctly.

• Make sure any device drivers or other software supplied with the USB device is correctly installed.

Refer to the documentation for the USB device.

• Reset the device by detaching and reattaching the USB connector.

If these actions do not correct the problem, run the diagnostic programs to test the USB connector (see
“Lenovo Solution Center” on page 53 for instructions). If the USB device came with its own diagnostics,
run those diagnostics against the USB device. If you need technical assistance, see “Lenovo Support
Web site” on page 32.

Diagnostics

The diagnostic program is used to test hardware components of your computer. The diagnostic program can
also report operating-system-controlled settings that interfere with the correct operation of your computer.
You can use the preinstalled diagnostic program to diagnose computer problems, if your computer is
running the Windows operating system.

Notes:

1. Your computer is preinstalled with the Lenovo Solution Center program for diagnostic purposes. For

more information about the Lenovo Solution Center program, see “Lenovo Solution Center” on page 53.

2. If you are unable to isolate and repair the problem yourself after running the diagnostic program, save

and print the log files created by the diagnostic program. You will need the log files when you speak to a
Lenovo technical support representative.

Lenovo Solution Center

The Lenovo Solution Center program enables you to troubleshoot and resolve computer problems. It
combines diagnostic tests, system information collection, security status, and support information, along
with hints and tips for maximum system performance.

Notes:

• The Lenovo Solution Center program can be downloaded from http://www.lenovo.com/diags.

• If you are using other Windows operating system rather than Windows 7 and Windows 8, go to

http://www.lenovo.com/diags for the latest information on diagnostics for your computer.

To run the Lenovo Solution Center program, see “Lenovo programs” on page 30.

For additional information, refer to the Lenovo Solution Center help system.

Note:

If you are unable to isolate and repair the problem yourself after running the program, save and print

the log files. You will need the log files when you speak to a Lenovo technical support representative.

Chapter 5

.

Troubleshooting and diagnostics

53

«
...
55
56
57
58
59
...
»

Содержание 3376















































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 3376

Бренд: VALKPC Страницы: 20

Бренд: Gateway Страницы: 12

Бренд: Risecom Corporation Страницы: 32

Бренд: MSI Страницы: 100

Бренд: Asus Страницы: 66

Essentio CM5571

Бренд: Asus Страницы: 122

Бренд: Asus Страницы: 130

Essentio CM5675

Бренд: Asus Страницы: 71

Essentio CG1330

Бренд: Asus Страницы: 71

Essentio CM5671

Бренд: Asus Страницы: 71

Бренд: Asus Страницы: 166

Бренд: Asus Страницы: 134

Бренд: Asus Страницы: 140

Бренд: Asus Страницы: 178

Бренд: Asus Страницы: 182

Бренд: Asus Страницы: 202

Бренд: Asus Страницы: 94

Бренд: Asus Страницы: 56

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды