Lenovo 0870A6U, Руководство пользователя

Страница: 43 / 100

7.
Make sure that the small handle is in the raised position and the
microprocessor retainer is fully open.
8. Hold the new microprocessor and align the notches
2
on it with the
alignment keys in the microprocessor socket, or align the small triangle
1
on
one corner of the new microprocessor with the corresponding beveled corner
of the microprocessor socket.
9. Lower the new microprocessor straight down into the microprocessor socket
on the system board.
10. Close the microprocessor retainer and lock it into position with the small
handle to secure the new microprocessor in the socket.
11. Reinstall the heat sink and the fan duct. See “Replacing the heat sink” on page
30.
12.
Reinstall any other parts or reconnect any other cables you removed.
Figure 24. Removing the microprocessor
Figure 25. Installing the microprocessor
Chapter 2. Installing or replacing hardware
35