background image

1

INSTALLATION INSTRUCTIONS

THIS MANUAL MUST BE LEFT WITH THE 

HOMEOWNER FOR FUTURE REFERENCE

LENNOX MERIT SERIES

 GAS FURNACE

506998-01

08/2013 Supersedes 06/2012

Improper installation, adjustment, alteration, 
service or maintenance can cause property 
damage, personal injury or loss of life. 
Installation and service must be performed 
by a licensed professional installer (or 
equivalent), service agency or the gas 
supplier.

WARNING

!

!

As with any mechanical equipment, personal 
injury can result from contact with sharp 
sheet metal edges. Be careful when you 
handle this equipment.

CAUTION

!

TABLE OF CONTENTS

Lennox Merit Series

 Furnace Specifications ........... 2

Lennox Merit Series

 Gas Furnace ............................ 3

Shipping and Packing List........................................... 3
Requirements ............................................................... 3
General ......................................................................... 4
Shipping and Packing List........................................... 4
General ......................................................................... 4
Location/Placement ..................................................... 4
Duct System ................................................................. 5
Installing Optional Cooling Coil ................................... 5
Venting ......................................................................... 6
General Lennox Merit Series

 E or EC Series  ......... 17

Gas Piping .................................................................. 17
Electrical .................................................................... 18

Filters ......................................................................... 19
Duct System ............................................................... 19
Venting ....................................................................... 19
Gas Piping .................................................................. 19
Electrical .................................................................... 21
Integrated Control ...................................................... 22
Lennox Merit Series

 Schematic wiring diagram ... 23 

Unit Start-Up .............................................................. 24
Gas Pressure Adjustment .......................................... 25
Proper Combustion .................................................... 26
High Altitude .............................................................. 26
Other Unit Adjustments ............................................. 27
Service ....................................................................... 28
Repair Parts ............................................................... 31

This is a safety alert symbol and should never be ignored. 
When you see this symbol on labels or in manuals, be alert to 
the potential for personal injury or death.

Содержание Merit Series


































Отзывы: