33
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Combustible
Wall
Framing
Combustible
Finished Wall
Materials
Drywall
Bracket/Spacer
Top of Appliance
Louvers
Top of
Door Frame
Hood must be
installed as shown.
Figure 63 -
FINISHING REQUIREMENTS
in. Min.
(25 mm)
This Area Must Remain
Clear of Combustible
Materials
3" (76 mm)
Top Spacers
Radiant panel
Top of Appliance
Top of Door Frame
Hood must be
installed as shown.
IF OPTIONAL RADIANT
PANELS ARE INSTALLED
FINISHING REQUIREMENTS
Wall Details
Complete finished interior wall. To install the appliance facing flush with the finished wall, position framework to accommodate the thickness of the
finished wall (
Figure 63
).
See Page 4 for Cold Climate Insulation and Page 7 for Clearances
.
Step . HOOD INSTALLATION
All of these appliances must have hoods installed prior to operating
(see
Figure 63
).
On all clean face appliances, slide the hood into the slots on the lower edge of the radiant panel.
On louvered face appliances, slide the hood into the slots on the lower edge of the cabinet top.
