Lennox M0STAT64Q, Инструкция по установке и эксплуатации

Страница: 7 / 16

7
1. Remove the controller from the back plate us-
ing a flat-head screwdriver. See figure 11.
2. Mount the back plate as appropriate for your
application. See figures 12 and 13.
Figure 11. Remove Back Plate
Slots
Figure 12. Attach Back Plate to Wall
Back plate
Screws (M4×20)
Figure 13. Attach Back Plate to J-box
Switch box
Back plate
Screw (M4×20)
Screws (M4×25)
3. J-box installation - Adjust the length of the two
plastic spacers as needed to allow the control-
ler to be mounted flush with the wall.
NOTE – Be sure to provide for future mainte-
nance by allowing enough slack in the wiring to
allow the controller to be removed from the wall
if needed.
Installation
4. Insert the provided battery into controller,
positive side out. The battery stores the day
and time in case of power outage. Replace
the battery when it’s charge is depleted.
5. Reattach the controller to the back plate. Be
careful not to pinch or bind the wires. See
figure 10.