2
8
N(1) 2
3
blue
brown
black
yellow-
green
Outdoor unit connection
4.
Put wiring cover back and then tighten the screw.
5.
Close the panel.
with wire clip.
installation.
● For the air conditioner without plug, an
circuit break must be installed in the line.
The circuit break should be all-pole parting and the contact parting distance
should be more than 3mm.
3. Remove the wire clip; connect the power connection wire to the wiring terminal
Installation of indoor unit
Note:
●
All wires of indoor unit and outdoor unit should be connected by a professional.
for a new one. Avoid extending the wire by yourself.
power connection
wire
cable-cross
hole
2. Make the power connection wire go
through the cable-cross hole at the back
of indoor unit and then pull it out from
the front side.
