507146-01 5/2013
Page 14
Adjusting Room Temperature, Away Mode, Program Change, Clock and Weather
Adjust temperature when programming is OFF—
When the
programming is OFF, the mode button (shown in figure 20, labeled
heat or
cool
) indicates a manual state (no mention of “program”). In this mode,
change temperature by pressing a
set temp
button, which produces an up or
down arrow, then use the arrows until the “cool to” (or “heat to”) number is at
the desired temperature.
This setting will remain until you decide to change it again. (The inset shows
an alternate configuration of button layout in non-program mode.)
use arrows
to change
temperature
?
touch
cool-to
button
indoor temperature
indoor humidity is 41%
fan is
OFF
fan is
AUTO
cool-to
set temp
75
heat to
70
heat
or
cool
fan is
AUTO
system is cooling
alternate
cool-only button
layout
(mode
button)
9:39 am January 23, 2012
Wi-Fi
?
enter
away
cool-to
set temp
75
cool
only
fan is
AUTO
Figure 20. Adjusting Temperature with NO Program Running
Away Mode (Vacation)—
The
enter away mode
button on the home
screen sets the system for manual operation and allows you to set the ther
mostat for energy saving while you are gone for an extended period of time.
In this mode, the system will only come on if indoor temperature falls below a
set degree (62 default for heating) or if indoor temperature rises above a set
degree (85 default for cooling). You may adjust those settings as desired
(see figure 21). To exit away mode, press
cancel away mode
.
indoor temperature
9:39 am January 23, 2012
cool-to
set temp
82
heat to
60
use arrows to
change
temperature
?
9:39 am January 23, 2012
Wi-Fi
?
cancel
away
system is currently using energy saving AWAY settings
Figure 21. Adjusting Temperature with Program Running
(Away Mode)
Turn Programming ON—
If the programming is OFF, turn it on by
pressing the mode button (shown in figure 22, labeled
heat or cool
). The
manual settings menu includes an option to access programs. Select
pro
grams
. The program settings menu takes the place of the manual settings
menu. (Either menu will time out and disappear if you don't make a selection
within a few seconds). Select an option (e.g.
spring/fall
), The menu disap
pears and the mode button will display the selected program (e.g.
spring...program is ON
).
Turn Programming OFF—
If the programming is ON, turn it off by
pressing the mode button (e.g.
spring...program is ON
). The program set
tings menu includes an option for manual. Select
manual
. The menu chan
ges to the manual settings. Select one (e.g.
heat only
), The menus disap
pear and mode button will display the selected manual option (e.g.
heat
only
).
