background image

507146-01 5/2013

Page 20

HIGH 

­ The system supplies lower indoor airflow at all compressor ca­

pacities, improving humidity removal by operating at a lower sensible
to total ratio.

Remember that the humidification only operates while in the heating mode
and dehumidification only operates while in the cooling mode.

SYSTEM SETTINGS

current  indoor humidity is 50%

heating

mode

COMFORT

humidifier

is ON

de-

humidifier 

MEDIUM

40

%

set to

50

%

set to

ALL CHANGES MADE ON
THIS SCREEN ARE IN­
STANTLY SAVED.

9:39 am January 23, 2012

?

Wi-Fi

OFF

MEDIUM

HIGH

humidifier

display

 is ON

(default is ON)

humidification

settings

dehumidification

settings

Figure 36. Humidifier Controls (Non-Communicating Outdoor Unit)

Connecting to a Home Wi-Fi Network

Check the router utility program or contact service provider for help.

When determining the location for the Wi-Fi thermostat, be sure it is in an
area near enough to the homeowners Wi-Fi router to ensure good commu­
nications signal between the thermostat and the router. (

Hint:

 use a smart

phone with Wi-Fi and Wi-Fi finder application to locate and determine signal
strength.)

NOTE - Thermostat will not be able to reliable connect to a router if the
received signal strength indicator (RSSI) is -70 or greater.

Secure Connection Recommended!

 

Verify the router is capable of,

and set to operate in wireless network “802.11b” mode. Check router
utility program or contact service provider for assistance.

ENABLING WI-FI

To enable the Wi-Fi feature to communicate with a wireless router

1. Press and release “Wi-Fi” in the lower left corner of the HOME screen.
2. Press the 

Wi-Fi enable

 button.

indoor  temperature

indoor humidity is 41%

fan is

OFF

9:39 am January 23, 2012

fan is

AUTO

cool-to

set temp

75

Heat-to

72

heat

or

cool

fan is
AUTO

enter
away

outdoor

temperature

80

system is cooling

Wi-Fi

Zone 1

?

Wi-Fi

Figure 37. Press Wi-FI

WI-FIL SETTINGS

Press to enable /

disable Wi-FI

9:39 am January 23, 2012

disable

Thermostat is not connected to the Wi-FI network

WI-FI

Wi-Fi

Zone 1

?

X

Figure 38. Enable Wi-FI

3. Press 

next 

as many times as necessary; then press 

accept 

after read­

ing the User Agreement.

Содержание icomfort Wi?Fi Thermostat



























Отзывы: