Page 13
WARNING
USE COPPER CONDUCTORS ONLY
1 - Disconnect all power supplies.
2 - Remove the air handler access panel.
3 -
Route the field supply wires to the air handler
electrical connection box.
4 -
Use wire nuts to connect the field supply
conductors
to the unit black and yellow leads, and the ground
wire to ground terminal marked GND.
5 - 5. Replace the air handler access panel.
SIDE
TOP
FIGURE 15
. Electrical Connections
(Upflow Configuration)
NOTE
-
To avoid the possibility of moisture damage to the
control in some right-hand discharge configurations, the
control panel can be relocated to the end panel as shown
in figure 16.
TOP
SIDE
FIGURE 16
. Control Panel Relocated to End Panel
(Left-Hand Horizontal Configuration)
WARNING
Electrically ground air handler. Connect
ground wire to ground terminal marked
“GND”.
Failure to do so can result in death or
electrical shock.
