IOM BASIC CLIMATIC CONTROLLER - Page 27
use of device
Permitted use
This product is used to control single and dual circuit
chillers and heat pumps.
To ensure safety, the controller must be installed and
operated in accordance with the instructions supplied,
and access to high voltage components must be
prevented under regular operating conditions. The
device shall be properly protected against water and
dust and shall be accessible by using a tool only. The
device is suitable for incorporation in a household
appliance and/or similar air conditioning device.
According to the reference regulations, it is classified:
In terms of construction, as an automatic electronic
control device to be incorporated with independent
assembly or integrated;
In terms of automatic operating features, as a type 1
action control device, with reference to manufacturing
tolerances and drifts;
As a class 2 device in relation to protection against
electrical shock;
As a class A device in relation to software structure
and class.
Forbidden use
Any use other than the permitted use is forbidden.
Please note that relay contacts supplied are functional
and are subject to fault (in that they are controlled by
an electronic component and be shorted or remain
open); protection devices recommended by product
standards or suggested by common sense in response
to evident safety requirements shall be implemented
outside of the instrument.
RESPONSIBILITY AND RESIDUAL RISKS
shall not be held liable for any damage incurred as a
result of:
installation/use other than those intended, and, in
particular, failure to comply with the safety instructions
specified by applicable regulations and/or provided in
this document;
use with equipment which does not provide adequate
protection against electric shocks, water and dust under
the effective conditions of installation;
use with equipment which permits access to hazardous
parts without the use of tools;
installation
/use with equipment which does not comply
with current
regulations
and legislation.
