Lenhardt & Wagner LW 320 E MC, Руководство по эксплуатации

Страница: 61 / 221

A - 59
A
LW 320 E MC / LW 400 E MC
Version: 16.03.2015
M A I N T E N A N C E A N D S E R V I C E
Replace inlet and outlet valve 1st stage
Inlet and outlet valves change as follows:
• Remove crankcase ventilation hose (Fig. 1)
• Loosen pipe connections of 1st cooling pipe (Fig. 2).
• Loosen clamp of cooling pipe (Fig. 3).
• Remove 1st cooling pipe.
• Loosen pipe connections of 2nd cooling pipe (Fig. 4).
• Remove cooling pipe bracket (Fig. 5).
• Remove complete 2nd cooling pipe.
• Remove special hexagon bolt (Fig. 6).
• Remove cylinder head mounting screws.
• Remove complete valve head 1st stage (Fig. 7).
Continued on the following page
Fig. 5 - Remove cooling pipe bracket Fig. 7 - Remove valve head Fig. 6 - Remove special hexagon bolt
Fig. 2 - Pipe connection Fig. 4 - Loosen pipe connections Fig. 3– clamp of cooling pipe
Fig. 1 - Crankcase ventilation hose