Lenhardt & Wagner LW 320 E MC Скачать руководство пользователя

Страница: 55 / 221

A - 53

LW 320 E MC / LW 400 E MC
Version: 16.03.2015

M A I N T E N A N C E A N D S E R V I C E

Filter cartridge change LW 320 E MC

Filter cartridge change as follows:

• Stop the compressor and open carefully the drain valves.

Please wait till the filter housing is completely vented; this
procedure takes approx. 1 - 2 minutes

• When no air discharges from the condensate release

hoses, the pressure vessels are depressurized.

• Remove the end filter cover (Fig. 1). Remove the filter

cover by using the filter tool. The housing can not be
opened when it is still under pressure.

• After opening the housing, pull out the filter cartridge by

the catch (Fig. 2).

• Open the packaging of the new filter cartridge and place it

into the filter housing (press slightly).

• Screw the filter housing cover in by using the filter tool

and turn it back 1/4 turn. This avoids tightening of the
cover due to vibration.

The filter cartridge change is now completed.

Fig. 1 - Loosen filter housing cover by

using the filter tool

Fig. 2 - Pull out the filter cartridge by

the catch and insert a new cartridge

Note

Ensure that the old filter cartridge is disposed correctly at an approved waste point.

Caution

Do not run the compressor with empty unfilled cartridges.

Only use original L&W genuine.

Содержание LW 320 E MC






























































































































































































































Результаты поиска

Содержание LW 320 E MC

Отзывы:

Похожие инструкции для LW 320 E MC

Бренды по названию

Популярные бренды

Lenhardt & Wagner LW 320 E MC, Руководство по эксплуатации

Результаты поиска

Содержание LW 320 E MC

Отзывы:

Похожие инструкции для LW 320 E MC

Бренды по названию

Популярные бренды