Lenhardt & Wagner LW 320 E MC Скачать руководство пользователя

Страница: 186 / 221

Version: 03.02.2015

A U T O S H U T D O W N

Safety valve test

Safety valve test as follows:

• Disconnect compressor from the electrical power supply

and protect against unexpected restart.

• Open the cover of the switch box.

• Switch on the "Test Safety Valve" switch (pressure switch

will be deactivated!).

• Close the cover of the switch box.

• Connect the compressor to the electrical power supply.

• Close filling valves.

• Start the compressor.

• Watch the final pressure gauge. The safety valve should

open when reaching working pressure of the compressor.
If not, switch off the unit and take out of service until the
safety valve has been replaced.

• Switch off the compressor.

• Disconnect the compressor from the electrical power

supply and protect against unexpected restart.

• Open the cover of the switch box.

• Switch off the "Test Safety Valve" switch (pressure switch

will be activated!).

• Close the cover of the switch box.

• Connect the compressor to the electrical power supply.

The safety valve test is now completed.

Note

Do not fill any tank during test phase!

Switch box

Safety valve test switch (up)

D - 25

LW 320 - 400 E MC

Содержание LW 320 E MC






























































































































































































































Результаты поиска

Содержание LW 320 E MC

Отзывы:

Похожие инструкции для LW 320 E MC

Бренды по названию

Популярные бренды

Lenhardt & Wagner LW 320 E MC, Руководство по эксплуатации

Результаты поиска

Содержание LW 320 E MC

Отзывы:

Похожие инструкции для LW 320 E MC

Бренды по названию

Популярные бренды