
LCD shown as SUCCESS and back to normal operation. The LCD symbol of "*"
will be turns ON.
NOTE :
?Press the [CH+] or [CH-] key as forward or backward for VOL LOCK and VOL
UNLOCK.
?Press the [SET] key to confirm and store the selected status of Volume
Lock/Unlock.
?Press the [ESC] key for escape and the selected status will not be stored.
Press the [SET] key to for 2 seconds
Press & release the [CH+] key for four (4) times
Press the [SET] key once
Press the [CH+] key to select
Press the [DEVICE] key to select a desired mode,then press the [SET] key
DEVICE SET UP (LOCK/UNLOCK)
The RC-8-2 provides the device lock or unlock of the remote to avoid the in
proper use of the children.
Simply follow below steps:
1. Press the [SET] key to for 2 seconds and the LCD will be shown CODE
SETUP.
2. Press & release the [CH+] key for five (5) times to view the DEVICE SET
page.
3. Upon the LCD shown as DEVICE SET, press the [SET] key once.
4. The LCD shown as TV DEV UNLOCK or TV DEV LOCK. Press the [Device]
key to select a desired mode (TV, VCR, SAT or AUD etc...):
?If you want to have DEVICE in unlock stage. Please press the [CH+] key to view
TV DEV UNLOCK page then press the [SET] key to confirm and LCD shown as
SUCCESS and back to normal operation, The LCD symbol of "*" will be turns
OFF.
?If you want to have device in lock stage, please press the [CH+] key to view TV
DEV LOCK and press the [SET] key to confirm and LCD shown as SUCCESS
and back to normal operation. The LCD symbol of "*" will be turns ON.
NOTE :
a) Press the [CH+] or [CH-] key as forward or backward for DEVICE LOCK and
DEVICE UNLOCK.
b) Press the [SET] key to confirm and store the selected status of Device
Lock/Unlock.
c) Press the [ESC] key for escape and the selected status will not be stored.
Press the [SET] key to for 2 seconds
Press & release the [CH+] key for five (5) times
Press the [SET] key once
Press the [CH+] key to select
Press the [DEVICE] key to select a desired mode, then press the [SET] key