LENCO BT-200 Light, Руководство пользователя

Страница: 7 / 64

B. About the rechargeable Ba tt ery
This Bluetooth Speaker has an internal, non–user-replaceable ba tt ery. For
the best results, the fi rst time you use this Bluetooth Speaker, let it
charge for about 6 ~7 hours or un ti l the charging LED indicator light goes
fr om a red light to ‘o ff ’ which shows you the ba tt ery is fully charged.
To mai ntain the ba tt ery life and perf ormance , if the speaker isn’t used for
a while, the ba tt ery mig ht need to be recharged. Charge the ba tt ery at
least once every mo nth.
To charge the rechargeable ba tt ery:
1. Connect the Bluetooth Speaker’s “ Micro USB socket (10)” with the
original USB cable (supplied), to a USB power charger which is able to
provide an output of at least DC 5V 1A.
2. The “Charge (7)” LED will turn On in red, the ba tt ery is charging.
3. The “Charge (7)” LED will turn O ff when the rechargeable ba tt ery is
fully charged.
4. Disconnect the USB cable when it is done.
C. Power ON and Pairing
1. Press and hold the “ (2)” bu tt on un ti l you hear the “Welc ome
Melody” sound, to turn on the device, the Bluetooth
searching/reconnect func ti on are open;
2. the “Bluetooth (7)” LED is slowly blinking in blue.
3. Then, ac ti vate the Bluetooth func ti on on your Bluetooth device (e.g.
mobi le phone); the device will enter the Bluetooth searching mod e
aut om a ti cally; if not, tap the related selec ti on to ma nually enter the
searching mod e. (refer to your device’s ma nual when necessary)
4. Your Bluetooth device should show “BT-200” in the list, and then
select it for pairing. Wait for som e seconds and you will see a
‘connected’ me ssage as shown on your mobi le device. If the pairing is
successful, a tone will sound “DU” and the “Bluetooth (7)” LED will
show a steady blue light.
5. Now, you can start to play mu sic fr om your mobi le device by its mu sic
player progr am.
6. Press and hold the “ (2)” bu tto n un ti l you hear the “Shut Down
Melody” sound to turn O ff th e device when it is not in use.
Note: In case you own two BT-200 speakers: in case you paired speaker
1 before via Bluetooth, and now you want to pair speaker 2 only, please
remove speaker 1 from your Listed Devices in Bluetooth before trying to
pair speaker 2; otherwise speaker 2 cannot be recognized!
D. Disconnect from paired device
1. To disconnect with the paired device and for the best result, turn O ff
the Bluetooth Speaker by pressing the “ (2)” for a longer time.
2. Or, you can choose “Disconnect” fr om your Bluetooth paired device
list on y our mo bile device;
6