LENCO BT-200 Light, Руководство пользователя

Страница: 10 / 64

3. Press and hold the “ / (4)” bu tt on to reject the call if you want. Or,
4. Press the “ / (4)” bu tt on shortly to pick up the call.
5. Now you are calling with the Bluetooth speaker.
6. Press “ / (4)” shortly again to hang up the call when it’s fin ished.
The pa used mu sic will resu me au tomati cally.
Tip:
speak to the
“MIC (3)”
direct with a distance of 30 ~ 50cm to get the
best speakerphone performance when necessary.
J. Redial For Last Call Fun ction
1. To redial the last called nu mb er by the Bluetooth Speaker, even it is in
mu sic playing mod e.
2. Press the “ / (4)” bu tt on twice to enter into the redial func ti on;
the playing will pause and switch to the calling func ti on for redial.
3. Press the “ / (4)” bu tt on again to hang up the redial call.
4. Make sure that your mobi le phone has a last dialed call; if not, the
redial for last call func ti on cannot be ac ti vated.
K. Low Power Reminder And turn off
1. The Bluetooth Speaker will send tones out fr om the speaker every 10
seconds to 1 m inute when the ba tt ery s ti ll has around 30 minu tes
working time . When you heard this r emind er, please connect the
device to the USB power for charging, if you s ti ll want to use the
device.
2. If not, the Bluetooth Speaker will power O ff to the sleep mod e when
the ba tt ery keeps a low energy level a ft er 30 minu tes.
L. Use AUX IN Fun cti on
a. Use AUX In under power ON mode: (Bluetooth un-paired)
1. Make sure that the external device is switched on and controlled by
the AUX output source with m usic playing.
2. Press and hold the “ (2)” bu tt on un ti l the “Welc ome Melody” is
heard to turn on the device;
3. Connect the Bluetooth Speaker’s “AUX (9)” jack with an external
device’s jack output through the Audio cable.
4. The mod e will switch to the “AUX IN” func ti on aut om a ti cally and the
AUX IN connected device will then play.
b. Use AUX In under the Bluetooth music playing mode:
1. In Bluetooth m usic playing mod e, connect the Bluetooth Speaker’s
“AUX (9)”
jack with an external device’s
“AUX/LINE”
output through
the audio cable. The AUX IN connected device will then play.
2. In Bluetooth interconnec ti on mu sic playing mod e, when you insert
AUX in into the main unit, both units will be disconnected fro m
Bluetooth. When you insert AUX in into the slave unit, the main unit is
sti ll working. When you disconnect the Aux in, you need to reconnect
these two units again for the interconnec ti on.
9