LEMKEN Ecospray, Руководство по эксплуатации

Страница: 131 / 141

Working in the field
129
13.1
Manual pressure setting
The manual pressure setting can be used if:

the working width was reduced [except over the section width circuit],

no signal is received from the flowmeter,

national plant-protection regulations require manual pressure control.
The Operating menu displays the manual pressure settings.
If the control unit is set to the manual pressure setting, the rotary control valve must be operated
before starting work. The suitable setting can be found in the nozzle table.
- Press the key to open the rotary control valve.
- Press the key to close the rotary control valve.
13.2
Higher/lower quantity circuit
The target application quantity can be increased or decreased during operation via the prese-
lected percentage step.
In the Operating menu the configured higher/lower quantity circuit
can be displayed as a %.
If the higher or lower quantity is active the target application quan-
tity flashes on and off.
To set the value of higher or lower quantities:
- Press the key to increase the value.
- Press the key to reduce the value.
The higher/lower quantity changes by the preset value every time the key is pressed.
To set the value of higher/lower quantities to zero:
- Press the two keys simultaneously.