Configuration
Power Analyzer NORMA 4000, NORMA 5000
35
EO1111G REV G
Press the function key
∫
.
Integration symbol is displayed in the menu bar.
Move Cursor to
∫
display and press
Enter
.
The
Integration Setup
menu is displayed.
In the
Integration Setup
menu, define the following settings:
Line Function
En/Start
Enable integration function/ set start conditions
Clr/Stop
Configure data reset / set stop conditions
Val 1..3
Select first three values
Val 4..6
Select next three values
Menu
Integration Setup
is displayed on the screen
Select with the cursor in line
Val 1..3
or
Val 4..6
a value and
confirm with
Enter
.
A dialog window showing the selectable values is displayed.
Move the Cursor in the window to the wanted value and
confirm with
Enter
.
The parameter is now shown on the display
Configure the other values accordingly
Save the settings with
SAVE
in the desired configuration.
In this menu you can enable / disable the integration function. Also
the way of clearing the values can be configured. This is done in
the
Integration Setup
menu at column
State
.
Line Settings Description
En ON
OFF
Integration function active
Integration function inactive
Clr MAN
AUTO
Clear manual
Auto clear at start
Menu
Integration Setup
, first field column
State
is highlighted
Press
Enter
, select
ON
and confirm with
Enter
.
The integrations function is now enabled . If you want to
disable it, select
OFF
and confirm with
Enter
Save the settings with
SAVE
in the desired configuration.
Select integration
value
Configure status
All manuals and user guides at all-guides.com
