8
FX
22
FX 22 - COMBI MODE
In COMBI mode, the two sections (FX A and FX B) operate in series and allow you to apply two different
effects to the same signal. To use the COMBI mode, connect the mixer’s send or the instrument’s output
only to the FX A input.
FX B PRESETS
Rotary selector for choosing the type of preset used by the FX B section.
FX B PEAK
The FX B section’s peak LED.
FX B VARIATIONS
Rotary selector for choosing the variations of the FX B section’s presets.
FX A MIX
Potentiometer for adjusting the balance between the original signal and effect’s signal of the FX
A section. Turning it completely to the left (DRY), only the original signal is fed out and completely to
the right (WET), only the processed signal.
FX A OUT
Potentiometer for adjusting the FX A section’s output level.
FX B OUT
Potentiometer for adjusting the FX B section’s output level.
FX B MIX
Potentiometer for adjusting the balance between the original signal and processed signal of the
FX B section.
ON
LED indicating that the unit is switched on.
Front panel
FX A
INPUT FX A
LEFT OUT
RIGHT OUT
COMBI
FX A
FX B
FX A
INPUT FX A
INPUT FX B
LEFT OUT
RIGHT OUT
FX B
