LELY 510 CD, Руководство оператора

Страница: 20 / 24

innovators in agriculture
EN-18
7.3
Periodic maintenance
Periodic maintenance must be carried out:
• at the start of the raking season;
• before prolonged storage of the machine;
• when the machine is used extensively during the season.
- Grease all points of the machine listed in § 7.2 “Lubrication”.
- Grease the spring-loaded locking pins of the yoke lock of the PTO
shaft.
- Check if the PTO shaft telescopes smoothly.
A damaged PTO shaft may cause excessive wear and tear to the
machine and tractor.
- Check the machine for any damage and defects. Repair or replace
damaged parts.
- Check the hydraulic system for leaks and damaged parts. Repair or
replace damaged parts.
- Check the gearbox for grease leakage (fig. 21).
The grease does not need to be replaced. In the event of any
grease loss, top up with SHELL ALVANIA WR-0 (max. 0.33 kg).
Replace the grease if it is contaminated by water or is no longer
compliant due to another cause.
When mounting the cover, lubricate the edge of the gearbox and
the bolt holes with a fluid gasket (LOCTITE 574).
An incorrect quantity of grease may lead to overheating
and cause irreparable damage to the gearbox.
- Check the tyre pressure (fig. 22).
- Check all bolts and nuts for tightness.
Tighten loose bolts/nuts to the torques specified below.
M6 M8 M10 M12 M14 M16 M20 M24
Nm 10 25 50 85 135 215 410 710
kgm 1.0 2.5 5.0 8.5 13.5 21.5 41.0 71.0
21
SHELL ALVANIA WR-0
max. 0.33 kg
!
22
300 kPa
(3.0 bar)