LELY 5.1103.0010, Руководство оператора

Страница: 60 / 192

4-28 Description and Operation
D-H023.0906EN
innovators in agriculture
4.3.6.5 Preparation Main Cleaning
Before the main cleaning can be done, the boiler must be emptied and
the main cleaning must be prepared. In this case, the following
messages are displayed on the Tab [Process] in the frame Cleaning:
•
On the first line:
•
The status is: 'Preparing Astri-Lin' or 'Preparing Astri-Cid'.
•
On the second line:
•
The status is: 'Milk cup flush'
•
The status is: 'Empty boiler'
•
The status is: 'Local rinse'
•
The status is: 'Dry milk line'.
•
On the third line:
•
The status is: ' Astri-L ' or 'Astri-Cid' or 'Astri-Lin'.
After the boiler is empty, the boiler is filled with water. This water is
heated to boiling point and then the robot is ready for the main
cleaning.
4.3.6.6 Main Cleaning
During a main cleaning, boiling water with a lye-based or acidic cleaning
agent (Astri-Lin or Astri-Cid) is pumped through the milking installation
and the milk delivery line.
The X-Link displays the following messages on the Tab [Process] in the
frame Cleaning:
•
On the first line:
•
The status is: 'Cluster cleaning'.
•
On the second line:
•
The status is: 'Milk cup flush'
•
The status is: 'Blow empty milk'
•
The status is: 'Pre rinse'
•
The status is: 'Main wash'
•
The status is: 'Post rinse'
•
The status is: 'Blow empty water'
•
The status is: 'Dry milk line'.
•
On the third line:
•
The status is: 'Astri-Cid' or 'Astri-Lin'.
Pre and post rinsing are almost identical to short rinsing, with the
exception that in case of pre or post rinsing the milk delivery line is
rinsed as well.
If there are several milking robots connected to one milk delivery line,
the cleaning programme of the different robots is started
simultaneously.