Lelit Kate PL82T, Руководство пользователя, Страница: 16 / 183

VIP Line - Kate
- PL82T
16
decrease or increase the grinding time.
H.3 Three seconds after the last press of a button, LCC stores the data and exits
from settings mode.
I
Grind and distributing the coffee
I.1
Insert the selected filter into the hot filter holder (e).
I.2 Check that the hopper is filled with beans and that it has the cover (1).
I.3
Position the filter holder, with the correct filter inserted, on the fork (10) to
“hook” it with the pin (8).
I.4
To grind 1 dose, press once the grinding switch (9) (PUSH). The grinder
grinds the dose ac-cording to the set time. Wait until the grinding is over. Re-
move the filter holder from the fork (10).
I.5 To grind 2 doses, press twice the grinding switch (9) (PUSH). The 2 presses
have to be within 2 seconds. The grinder grinds the dose according to the set
time. Wait until the grinding is over. Remove the filterholder from the fork (10).
I.6
Check the grinding and the quantity per dose.
I.7
To grind any quantity of coffee continuously, press the switch (9) (PUSH) and
keep it pressed. Remove the filterholder from the fork (10) once the desired
quantity has been ground.
I.8 Press the coffee with the tamper (a) and remove any coffee residues from the
edge of the filter holder.
Note.
We suggest 7 g for one cup and 14 g for two cups.
I.9 Snap the filter holder(e) firmly onto the coffee distribution group (16), so as
to align the handle with the padlock symbol on it.
I.10 Place one or two cups on the cup-holding grate (18), under the filter hol-
der(e).
I.11
Press the coffee switch (5) to start dispensing. The display (15) shows a
countdown in sec-onds.
Note.
The countdown display is only to indicate the ideal extraction time and can
be modified as explained in the “Edit LCC settings” section.
I.12 When the countdown is over, the display will show “OK” but not stop the
machine. Once the required amount has been dispensed, press the switch (5)
to stop dispensing coffee.
I.13
Remove the filter holder(e), empty out the coffee grounds and clean tho-
roughly with a damp cloth.
Caution.
The filter holder must not be removed before coffee brewing is completed.