Lektro-Vend Combo Series Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 93

background image

POLYVEND SHIPPING POLICY

The following information is to assist you in assuring safe delivery of your merchandise and in expediting of
freight damage claims.

Our terms of sale are F.O.B. our factory. The responsibility for damage in transit is the carrier’s whether it be
visible or concealed damage. We have taken every precaution to ensure safe arrival of this equipment, but
our responsibility ceases the moment the shipment is turned over to the carrier.

Acceptance of this shipment by the carrier is an acknowledgment that the equipment was delivered to them

in good condition and properly packed. The carrier who delivers this merchandise to your door is responsible

for its safe delivery.

FOR VISIBLE DAMAGE

1.

IT IS VERY IMPORTANT TO INSPECT ALL FREIGHT DELIVERIES, WHETHER MACHINES OR

PARTS, IMMEDIATELY. If there is any visible damage you have the right to either refuse the merchandise
or accept the damaged shipment. If you accept it, make certain that you have the delivery personnel note the
nature and extent of damage on the freight bill.

2.

After you determine the extent and cost of the damage, notify the delivering carrier’s office by phone and

confirm with a written notice within 15 days requesting an inspection of the damaged merchandise. Keep a
copy of the inspection request for claim purposes. Do not destroy the packing material until shipment is

inspected and claim is settled.

3.

When the inspector arrives, ask for a claim form. In filing a claim, you may make a cash settlement with

the carrier for the full invoice price of the merchandise or contact Polyvend Inc. at l-800-71 O-8363 and make
arrangements to have merchandise returned for repair and file a claim for repair charges. Do not return

“DEADHEAD”. Do not claim more than the cash price of the machine, plus freight.

PROCEDURE FOR CONCEALED DAMAGE

1.

If there is no visible damage, YOU MUST OPEN THE SHIPMENT WITHIN 15 DAYS AND INSPECT FOR

CONCEALED DAMAGE. If there is concealed damage, notify the delivering carrier by phone immediately
asking for an inspection. Confirm the request in writing and keep

for

claim purposes. If you fail to notify

the carrier within 15 days of delivery by telephone and in writing, the freight company is no longer liable for
damage and will probably refuse your claim. Do not destroy packing material until shipment is inspected and
claim is settled.

2.

After inspection by the carrier, file a claim for damages at once. On concealed damage, unless it can be

proven that the carrier is responsible for the damage, they will probably want to settle on a compromise basis.
Therefore, the faster you inspect your delivery and notify the carrier, the better the chances for

full

settlement.

If the claim is disallowed, check on the possibility of a compromise.

«
...
28
29
30
31
32
...
»

Содержание Combo Series






























































































Отзывы:

Нет отзывов

Похожие инструкции для Combo Series

Бренд: Janome Страницы: 41

Бренд: Singer Страницы: 12

Бренд: Feiyue Страницы: 11

Бренд: Sagitter Страницы: 24

Бренд: Olivetti Страницы: 130

Бренд: Sinbo Страницы: 48

Бренд: Unicum Страницы: 115

Бренд: Olivetti Страницы: 216

Бренд: GBC Страницы: 38

Бренд: Vix Страницы: 11

Бренд: Muratec Страницы: 88

Бренд: Muratec Страницы: 114

Бренд: Murata Страницы: 100

Бренд: icetro Страницы: 124

Бренд: Scotsman Страницы: 2

Бренд: RCA Страницы: 6

Бренд: Renz Страницы: 8

SPS/F-1811 Series

Бренд: SunStar Страницы: 57

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды