Lektro-Vend Combo Series, Руководство по обслуживанию

Страница: 11 / 93

COLD FOOD SIDE SETUP
The Cold Food Side of the Combo unit comes equipped with nine (9) revolving shelves. The shelves are
designed in two halves, two 160 degree segments. Each segment can be quickly removed to change the
number of compartments per shelf and or to clean.
REMOVING TRAY HALVES
The tray halves can be easily removed to change the divider configuration for loading or for cleaning. They
are removed by the following procedures:
Underneath the center
of
the tray half is a leaf spring that is holding a stud attached to the tray. Pull down
on the spring to release the stud and pull the tray outward towards you.
2 . The rear of the tray is inserted into a groove in the collar that is attached to the tray column. A slight
outward pressure may be required to disengage the rear of the tray from the groove.
3.
lip on each tray is designed with tabs that extend beyond the back edge of the tray. These tabs
slip underneath the adjoihing tray half to lock the two halves together and provide support for each other.
4.
When the tray half is removed you will notice that the 12 and 6 compartment trays have a security top
with clips that slip through the top and over the dividers. After
changing
the dividers or cleaning the tray
replace the security covers and clips. These are required to keep the dividers from being bent sideways
and allowing the food from being removed from the next compartment.
CAUTION: ALWAYS INSTALL THE SECURITY COVER AND CLIPS