Lektro-Vend Combo Series, Руководство по обслуживанию

Страница: 27 / 93

next time set up as 2STRT hh.mm. Repeat the procedure above for this set up and the two additional ones
if required. When all four intervals have been programmed the control board will return to the service mode.
To avoid confusion, again the start time is when the machine is going to be turned off, and the stop time is
going to be when the machine is turned on.
F. ONE FREE PRODUCT SETTING
This option will allow a free product to be given to the customer at a preprogrammed interval. Setting this
interval to provides a free vend at every transaction disables the option and the maximum valid interval
is 255.
To access this option press selection button then press selection button F. The current interval will be
displayed as “Free xxx”. A new interval may be entered by pressing the selection button numbers, which will
be displayed as they are entered. The most significant digit is entered first followed by the lesser significant
digits. It is not necessary to enter leading zeros and only the first four numbers will be displayed and used.
To save this entry press selection button
To cancel an unwanted setting before saving, press selection button
G. PROMOTIONAL VEND SETTING
This option will allow a promotional product to be given to a customer for free in response to the purchase of
another product. When enabled, purchasing selection from one of the two possible promotional rows will
result in both the selection chosen and a promotional item of that row to vend sequentially.
To access this option press selection button then press selection button “G”. This will toggle the on/off
state. To program the promotional rows, after enabling the option as above, wait 1 second and the display will
continue to “ROWS
New rows may be entered by pressing the alphabetic selection buttons. The first
entry will effect the center character and the second will effect the right most character. Pressing selection
button before will clear both entries. Press selection button to save the entry.
To cancel an unwanted setting before saving, press selection button