8
▼
Down Key
Press to down, hold to go fast.
V/M Key
：
VFO/MR
VFO/MR mode Switch.
Call* Key
LX-928S
：
Press * key to start Call, in
VFO / MR / CH mode, be sure that
DTMF Mode is enabled
：
1, Automatic transmission: Fill in the
DTMF call list in the programming
software. In VFO / MR / CH mode,
be sure that DTMF Mode is enabled.
Press the CALL key, select an autodial
slot from the list. Press the PTT key to
send the selected DTMF sequence.
(Note: Slots 0-9 can be entered directly,
or press
▲
▼
keys to select. Slots
10-15 can only be selected by using the
▲
▼
keys.
2, Manual transmission: If the DTMF
autodial list is empty, automatic DTMF
transmission is disabled. However, you
can manually enter a sequence of
DTMF tones manually.
Press the “CALL” key twice, then enter
your desired sequence of DTMF tones
from the keypad. Finally, press the PTT
key to transmit. You will hear the
DTMF tones transmit if they were
properly entered.
LX-928: Press *key to start scanning.
F+ Numeral 1
：
SQL
Squelch Level, Press
▲
/
▼
to select 0-9
level, press any key to confirm and
exit.
