Leitner Berlin 2020, Руководство пользователя

Страница: 7 / 25

5
Getting Started
•
First, unpack your electric bike carefully making sure that you don’t scratch the bike with sharp tools such as paper knifes or
scissors.
•
Keep all packing material including the carton in the unlikely case the bike has to be re‐packed and shipped.
•
Locate all parts: battery, keys, front wheel, mudguards, charger, seat and seat post, front light, handle‐stem, pedals, tools
and any small parts like nuts or screws inside the shipping carton.
•
Sometimes small parts like nuts or screws may come loose during shipping so be sure and check the bottom of the carton
and protective wrapping carefully. Please note that eBikes are fragile items. Although we are using first class courier services
and the bikes are professionally packed it may happen that they get damaged during transit.
•
Please check the bike for damage and any missing parts upon arrival and let us know immediately. We will then work with
you on a solution and ship replacement parts as soon as possible.
Assembly Instructions
•
This bicycle has been disassembled for shipping. To ship the bike, the pedals, front light, front mudguard, seat, front wheel
and sometimes the handlebar may be loosened or removed.
•
Different parts of the bikes such as brakes and gears may need adjustment. This manual will list the steps required for
installation.
•
Check all nuts and bolts on the bike, even if parts have already been assembled by the factory, to make sure that they are
installed safely.
•
In the interest of safety It is recommended to have the bike assembled and adjusted by a bike mechanic and serviced
regularly.
Installation of front mudguard and front lights
This part of fork facing forward.
(The two sockets with threads pointing
forward are not used. They are for installation
of V brakes which are not needed since the
bike is equipped with front disc brakes.)
Fix mudguard to fork here On both sides
Top bolt: first insert Headlight, then front
Mudguard, then tighten bolt (refer to
additional picture below)
Brake callipers (need to face left hand side).
Install front light on top part of fork using
bolt (and nut if your model has nut) as
shown in the picture above.
Connect black wire to the “‐” pole at the
back of the light.
Connect red wire to the “+” pole. Make sure the small metal pins of
the light are inserted into the ending of the wire.
7
© Leitner Pty Ltd 2019