AES6800
+
Installation and Operation Manual
21
Chapter 3: Operation
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Remote Control
When the jumper is set to the “automatic” position, the setting is
handled by
+
Pilot Lite only. You may select the three setting modes
(automatic, manual, and bypass) remotely via
+
Pilot Lite.
Introducing Parameter Types
Most AES6800
+
parameters are adjustable, and can be set using either
card-edge controls (see
“Understanding Jumper Controls” on page 20
or a software application. However, there are some parameters that are
considered “read-only” and cannot be changed. Indicated by the
abbreviation “
[RO]
,” these parameters provide status and feedback
information only.
Adjustable Parameters
Two types of adjustable parameters can be changed using the card-edge
controls:
•
Numerical
parameters—which require you to select a value within
a numerical range
•
Selectable
parameters—which require you to select a specific
option
Both numerical and selectable parameter changes are immediate.
Use the available 6800
+
software controls (serial/local or Ethernet/
remote network) to view and monitor parameter selections.
