Leitch AES6800+, Инструкция по установке и эксплуатации

Страница: 28 / 54

14 AES6800
+
Installation and Operation Manual
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Chapter 2: Installation and Configuration
Jumper Control Types
You can use jumpers on the front edge of the AES6800
+
to select
manual control or auto control EQ setting mode and AES or bypass
mode.
Figure 2-2 on page 16 illustrates the location of these jumpers.
See “Setting Jumpers” on page 14 for information on how to set the
jumper controls.
Setting Jumpers
The AES6800
+
module has one standard jumper, which are located on
the front card edge. The jumpers allow you to switch between EQ
automatic and manual modes, and between AES and bypass modes.
Figure 2-1. Settings for Automatic / Manual EQ Mode, and AES /
Bypass Mode
EQ Mode
This distribution amplifier provides two options for EQ adjustment:
manual and automatic. The mode is jumper-selected. See
Figure 2-1 .
Note
We recommend that you use the
available 6800
+
software
control options (serial/local or
Ethernet/remote) to aid in
viewing, setting, and confirming
parameter values.