Leister WELDPLAST S1, Руководство по эксплуатации

Страница: 34 / 116

34
Entering names or passwords
• In keyboard mode, you can define names or enter passwords with a maximum of 12 characters.
Keyboard mode Character selection Symbol selection
Up (21)
Down (22)
Vertical character selection
Minus (24)
Plus (26)
Horizontal character selection Symbol selection
Confirmed (25) Confirm the selected character Confirm the selected symbol
Change between upper and lower case
Move the cursor in the name
Insert blank space
Delete one character (the character to the left of the cursor)
Select this symbol to switch to the
function display
27
27
34
35
Defining profiles
• In the «Save Profile» menu, you can save setpoint settings for the max. output volume, the plasticizing/air tem-
perature, and the air output and give the profile a name (see «Entering names or passwords» chapter).
• Creating a new profile:
– In the working display (28), set the required setpoints using the «Plus» or «Minus» keys (24/26).
– In the function display (27), select the Settings menu with the «Plus» key (26) .
– In the «Setup» menu, select «Save Profile» with the «Plus» key (26) .
– Select the «User-defined» profile and confirm with the relevant key (25) .
– In the function display (27), select the «Edit selected item» symbol and confirm with the relevant key
(25) .
– Enter the desired profile name (see "Entering names or passwords" chapter), then select the symbol
with the «Plus» key (26) and confirm with the relevant key (25) .
– In the function display (27), confirm the selected «Save» symbol with the relevant key (25) . The
profile has now been successfully saved and selected.
35 34