Leister Technologies AG
Operating Manual
Welding Machine SEAMTEK 36
Revision: A
QM
Page
10 / 62
Created
04.04.2014 TEX
Released
Modified
10
1.5 SP Specifications
Utility Requirements
Air
: 100-120 psi @1 cfm
Power
: 230V~ to 240 V~, 50/60 Hz, single phase, 17 amps
Weight
: 330k
The SEAMTEK 36 is a very precise machine in that it can maintain an air stream weld
temperature /-2 degrees F (°C) and can maintain the speed of each drive wheel
independently /- .01 inch per second at weld speeds ranging from 0.8 to 72’/min (0.25
– 22 meters per minute). This precision insures high quality welds over a very broad range of
fabric types, welding speeds, and temperatures. The SEAMTEK 36 is a highly versatile machine
and works well in conjunction with other welding formats such as Radio Frequency (RF).
1.6 Technical Support
This manual is designed to serve as a complete, easy-to-use reference source for the SEAMTEK
36. If any questions concerning the use and/or maintenance of your SEAMTEK 36 cannot be
answered by this documentation, please contact Leister Technologies AG for further support
.
Phone +41 41 662 74 74
Fax
+41 41 662 74 16
2.0 Machine Physical Components
This section describes the various modules available for use with your SEAMTEK 36. Contact
Leister Technologies AG for further information on ordering optional modules.
The SEAMTEK 36 is a modular system. This allows several components to be field replaced in
minutes with no special tools required. It also allows the machine to be configured in several
different ways.
2.1 Base Frame
The base frame in constructed of steel, making it extremely strong stable platform.
2.2 Primary Power Panel
The Primary Power Panel is a metal NEMA box that is mounted to the vertical post of the
machine. This module houses the primary power management system and control computer
