2018-08-07
Page 3
LABvault-HD
Front Panel
KEYPAD
The four LABvault-HD arrow keys are used to display status information as well as for the entry of TCP/IP network
addresses.
If you hold down an arrow key for more than one second, it begins to scroll through all of the available
options. Release the key when the desired option is displayed.
The front panel keypad also turns the LABvault-HD on/off. Note that the
LABvault-HD automatically turns on when the unit is plugged in.
When
held for four seconds, the red “X” button turns off the LABvault-HD. If the
LABvault-HD has been turned off, press the green check push button for
two seconds to turn the unit back on.
LEDS
The LABvault-HD front panel has two status, light-emitting diodes (LEDs) for at-a-glance feedback. The red “Record”
LED lights up when the LABvault-HD is encoding. The blue “Play” LED lights up when playback on the LABvault is
activated.
DISPLAY
The LABvault-HD display shows status and password-protected TCP/IP address entry screens. Once the LABvault-HD
has been booted up, press the up or down arrows on the keypad to display the following status screens:
06/13 10:30:00AM
094000 V1.1.11
Serial Number & Firmware Version
Firmware Date
IP Address
LABvault-HD Identification
06/13 10:30:00AM
FW Blt:5/31/12
06/13 10:30:00AM
10.9.0.16
06/13 10:30:00AM
ID:LABvault-HD
Recorder Status
06/13 10:30:00AM
Recorder Stopped
Bios Date
06/13 10:30:00AM
Bios:02/20/10
FRONT PANEL
BEFORE
unplugging or
removing power from the
LABvault-HD, shut down the
unit from its front panel.
Transfer Status
06/13 10:30:00AM
NX: 0.8591GB 2%
Indicates file transfer destination and
progress. If more than one destination is
selected for a transfer, the screen only shows
the first destination to which the LABvault-HD
sends the file. Changes to “Send Idle” when
there are no active file transfers.
Processor Temperature
06/13 10:30:00AM
Temp: 28
°
C
PStat Firmware Version
06/13 10:30:00AM
PStat Ver:4.10
Displays the firmware version for
the infrared remote control and
front panel status LEDs.
Player Status
06/13 10:30:00AM
MPEG Player Stop
Build Number
06/13 10:30:00AM
Bld Num: 197
